Skip to main content

Research Repository

Advanced Search

CO2-plume geothermal: Power net generation from 3D fluvial aquifers

Norouzi, Amir Mohammad; Pouranian, Fatemeh; Rabbani, Arash; Fowler, Neil; Gluyas, Jon; Niasar, Vahid; Ezekiel, Justin; Babaei, Masoud

CO2-plume geothermal: Power net generation from 3D fluvial aquifers Thumbnail


Authors

Amir Mohammad Norouzi

Fatemeh Pouranian

Arash Rabbani

Neil Fowler

Vahid Niasar

Justin Ezekiel

Masoud Babaei



Abstract

Previously CO2, as a heat-extraction fluid, has been proposed as a superior substitute for brine in geothermal energy extraction. Hence, the new concept of CO2-plume geothermal (CPG) is suggested to generate heat from geothermal aquifers using CO2 as the working fluid. In January 2015, a CPG-thermosiphon system commenced at the SECARB Cranfield Site, Mississippi. By utilising CO2, the demand for the pumping power is greatly reduced due to the thermosiphon effect at the production well. However, there are still parameters such as aquifer thermal depletion, required high injection rates, and CO2-plume establishment time, that hinder CPG from becoming viable. Moreover, the fluvial nature of sedimentary aquifers significantly affects the heat and mass transfer inside the aquifer, as well as the system performance. In the present study, a direct-CO2 thermosiphon system is considered that produces electricity from a 3D braided-fluvial sedimentary aquifer by providing an excess pressure at the surface that is used in the turbine. The system performance and net power output are analyzed in 15 3D fluvial heterogeneous - with channels’ widths of 50, 100, and 150 m - and three homogeneous aquifer realizations with different CO2 injection rates. It is observed that the presence of fluvial channels significantly increases the aquifer thermal depletion pace (22-120%) and therefore, reduces the system’s performance up to about 75%. Additionally, it is found that the CPG system with the CO2 injection rate of 50 kg/s and the I-P line parallel to the channels provides the maximum cycle operation time (44 years), as well as the optimum performance for the heterogeneous cases of the present study by providing about 0.06-0.12 TWh energy during the simulation time of 50 years. Also, to prevent rapid drops in excess pressure, a system with a yearly adjustable injection rate is implemented, which prevents the production well bottomhole temperature to fall below 80 ◦C.

Citation

Norouzi, A. M., Pouranian, F., Rabbani, A., Fowler, N., Gluyas, J., Niasar, V., …Babaei, M. (2023). CO2-plume geothermal: Power net generation from 3D fluvial aquifers. Applied Energy, 332, Article 120546. https://doi.org/10.1016/j.apenergy.2022.120546

Journal Article Type Article
Acceptance Date Dec 18, 2022
Online Publication Date Dec 27, 2022
Publication Date 2023
Deposit Date Dec 19, 2022
Publicly Available Date Jan 23, 2023
Journal Applied Energy
Print ISSN 0306-2619
Electronic ISSN 1872-9118
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 332
Article Number 120546
DOI https://doi.org/10.1016/j.apenergy.2022.120546

Files






You might also like



Downloadable Citations